One For All Universal Remote Codes and Programming Guide

Are you looking for a One For All universal remote code for your device? You’re in luck because I’ve got you covered. These codes are used to pair your universal remote to multiple devices so you can control everything with one remote. Trust me, having one remote for all your devices will simplify your life.

To make it even easier, we have a code finder tool to help you find the code for your specific brand and device. We also have a step-by-step programming guide to simplify the remote setup process.

One For All Universal Remote Codes

The 5-digit remote codes for popular TV brands are listed below.

Use our code finder tool below to find codes for more brands and devices.

One For All Universal Remote Code Finder

Once you find the codes for your particular brand and device, set up your remote control using the instructions below.

How to Program One For All Universal Remote

Programming Via Direct Code Entry

The programming instructions below apply to the following models:

• Smart Control Series: URC7955 (Smart Control 5), URC7980 (Smart Control 8), URC7880 (Smart Control 8 US).
• Evolve Series: URC7115 (Evolve TV), URC7125 (Evolve 2), URC7145 (Evolve 4).
• Essence Series: URC7110 (Essence TV), URC7120 (Essence 2), URC7130 (Essence 3), URC7140 (Essence 4).
• Contour, Essential, and Other Models: URC1210 (Contour TV), URC1240 (Contour 4), URC1280 (Contour 8), URC2981 (OFA8), URC3450 (Slim Line 4), URC3610 (Essential TV), URC3640 (Essential 4), URC3660 (Essential 6 US/CA), URC3661 (Essential 6 EU), URC3680 (Essential 8).

1. Select the Device to Program
   • Press the DEVICES or MODE button until the LED under the corresponding device (e.g., TV, DVD) lights up.
   • Skip this step if your remote only supports one device (e.g., Evolve TV, Contour TV, or Essential TV).
2. Enter Setup Mode
   • Press and hold the MAGIC or SETUP button.
     • For Smart Control, Evolve, and Essence Series: Hold until the LED blinks twice and stays on under the selected device button.
     • For Contour, OFA8, Essential Series: Hold for approximately 3 seconds until the LED blinks twice.
     • Note: Some models use The MAGIC button as SETUP (e.g., OFA8, Slim Line).
3. Enter the 4-digit Code
   • Use the number buttons to input the 4-digit code listed for your device’s brand. If the correct code is entered, the LED the LED blinks twice and turns off.
4. Test the Remote
   • Aim the remote at your device and press the POWER button:
     • If the device switches off, your remote is ready to use.
     • If not, repeat the steps with the next code listed for your brand.
     • Try another button, such as Play or Pause, if POWER does not work (e.g., on streaming devices).

Programming Zapper & Zapper+ Remotes

The programming instructions below apply to URC 6810 (Zapper) and URC 6820 (Zapper+) remotes.

1. Turn On the Device
   • Make sure the device (TV, Set-Top Box, or Audio device) is powered on and not in standby mode.
2. Enter Setup Mode
   • The button combination for setup varies by remote model and device type:
   • For Zapper:
     • TV: Hold the TV Power and STB Power buttons until the red LED blinks twice.
     • Set-Top Box (STB): Hold Volume + and Volume – until the red LED blinks twice.
     • Audio Device: Hold Channel + and Channel – until the red LED blinks twice.
   • For Zapper+:
     • TV: Hold TV Power and STB Power until the red LED blinks twice.
     • Set-Top Box (STB): Hold Volume + and Channel + until the red LED blinks twice.
     • Audio Device: Hold Volume – and Channel – until the red LED blinks twice.
3. Enter the Code for Your Device
   • For Zapper: Enter the 5-digit code using the Power, Volume, and Channel keys to represent digits as follows:
     • TV Power = 1
     • STB Power = 2
     • Volume Up = 3
     • Channel Up = 4
     • Volume Down = 5
     • Channel Down = 6

     Example: For the code 23415, press STB Power (2), Volume Up (3), Channel Up (4), TV Power (1), Volume Down (5).

   • For Zapper+: Enter the 4-digit code using the number keys.
4. Test the Remote
   • Aim the remote at the device and press the Power (or Mute) button. If the device responds (turns off or mutes), your remote is ready to use. If not, repeat the steps with the next code listed for your brand.

Programming Simple Series Remotes

The programming instructions below apply to URC 6410 (Simple TV), URC 6420 (Simple 2), URC 6430 (Simple 3), and URC 6440 (Simple 4) universal remotes.

1. Enter Setup Mode
   • For Simple TV/2, to set up:
     • TV: Press and hold the Red + Blue buttons for 3 seconds until the LED blinks twice.
     • SAT/Cable/Set-Top-Box: Press and hold the Green + Yellow buttons for 3 seconds until the LED blinks twice.
   • For Simple 3/4:
     • Press and hold the SETUP button for 3 seconds until the LED blinks twice.
2. Select the Device Type (For Simple 3/4 only)
   • Press the device button (e.g., TV) corresponding to the device you wish to control.
3. Enter the 4-Digit Code
   • Enter the first 4-digit code listed for your device’s brand. If the correct code is entered, the LED will blink twice.
4. Test the Remote
   • Aim the remote at your device and press the POWER button. If the device turns off, your remote is ready to use. If not, repeat the process using the next code on the list.

Programming Streamer Remote

Depending on the retailer, the OFA Streamer remote (URC 7935) comes preprogrammed for a Roku streaming box and a Samsung TV or TCL Roku TV. However, you can reprogram it to control other streaming devices, TV functions (Volume, Mute, Input, Power), or the Volume and Mute of a Sound Bar.

1. Turn On the Device
   • Ensure the device you’re setting up is powered on (not on standby), and aim the remote at it.
2. Enter Setup Mode
   • Use the appropriate button combination until the LED under the ring blinks twice:
     • TV: Hold TV Power + Back (Yellow LED)
     • Streamer: Hold Streamer Power + Home (Red LED)
     • Audio Device: Hold Volume + and Volume – (Green LED)
3. Enter the Code
   • Each brand has a 5-digit code using the following buttons:
     • TV Power = 1
     • Streamer Power = 2
     • Back (←) = 3
     • Home (⌂) = 4
     • Replay (⟲) = 5
     • Options (*) = 6
   •  For example, to enter 23161, press Streamer Power (2), Back (3), TV Power (1), Options (6), TV Power (1)
   • The green LED will blink twice when the code is entered correctly.
4. Test the Remote
   • Press the Power (or Mute) button. If the device responds, the setup is complete. If not, try the next code in the list.

Notes

• If certain buttons don’t work, restart from Step 2 and try another code.
• After setting up a TV, the Power, Volume, Mute, and Input buttons control it, with the ring lighting up yellow. If an audio device is set up, Volume and Mute control the soundbar or receiver, with the ring lighting up green.
• When pressing the TV Input button, use Up, Down, Left, Right, and OK to navigate your TV’s input menu. After pressing OK or waiting 10 seconds, the buttons will revert to controlling the streaming device.

So there you have it. Programming your One For All remote is a piece of cake with the right codes and instructions. Follow our guide, and you can quickly connect your remote to your TV, soundbar, and other devices without any hassles. We know it doesn’t seem easy initially, but breaking it down step by step will make it much easier. If you get stuck or have questions, leave a comment below.

FAQs